Water Saving Tap Inserts Twin Pack - with Special Fitting Tool

Designed to regulate the flow rate on two taps around the home to 5 litres per minute, helping you to reduce your water usage. The tap inserts are suitable for taps with unscrewable tops which usually feature two straight edges.

These water efficient tap inserts comes with:

• 4 adaptor rings (2 x black & 2 x grey)
• 2 x 5 litre per minute aerator with Intelligent Flow Control

Fitting Instructions:

• Slide the opening of the blue tool around the end of the tap. There are various size fittings so make sure the tool fits snugly
• Twist anticlockwise until the end of the tap comes away from the spout
• Remove the original insert from the housing
• From the components, select one to replace the old insert, as follows (you’ll find only one component will fit):
• The grey ring is for housings that have an internal shoulder at the outlet of the housing
• The black ring is for housings that have no visible shoulder
• For small housings (JR size) just insert the aerator
• Install the converter ring into the tap housing and using original gasket replace on to spout hand tight. If using the grey or black converter ring, insert the aerator fully into the ring until the top of the aerator is flush with the top of the ring

*The tap insert requires the tap end to have two straight edges. It will fit the majority of taps with a screwed outlet housing. It is not suitable for large bath taps. The inserts should not affect the performance of your taps, merely regulate the flow to 5 litres per minute.

If you are not sure about the suitability of your tap to fit the Tap inserts, we recommend you do not attempt to fit them. They will fit a range of taps, in particular those whose nozzle ends feature two flat edges. Save Water Save Money cannot accept any liability for damage done to your fittings or property as a result of installation or use of this product.