Tap Aerator Kit - A twin pack of tap aerator inserts that can save up to 12 litres a minute*

Tap Aerator Inserts Kit

You may not realise but many homes have taps which flow at up to 18 litres a minute.If your washing your hands, doing the dishes or rinsing food in the kitchen sink do you really need that much water?

Together with the world leader in flow and stream technology, we have developed this tap insert twin pack, designed to reduce the flow rate on two taps around the home to 5 litres a minute, saving up to 12 litres a minute and when fitted to hot taps also reducing your gas or electricity bills by reducing the amount of hot water flowing.

You’ll not even notice a difference - either to the flow of water or to your tap. Our tap insert twin pack is unique because you don’t need to replace the external chrome or steel casing (outlet housing) found with conventional tap restrictors – you simply replace the internal plastic parts.

These tap aerators use intelligent flow control (PCA or Pressure Compensatory Accessory) which automatically compensates for system pressure. The tap aerator twin pack is sufficient for two tap conversions - separate hot & cold taps or mixers - fitting up to 85% of taps with screwed outlets.

Benefits

· Reduces waste of water and energy, by up to 60% on most taps.

· Flow rate of 3.5 litres a minute compared to standard wasteful output of up to 18 litres.

· Offers savings on water usage on taps with uncontrolled stream.

· Converts wash basins in the home or workplace with minimum interruption.

· Fully aerated stream limiting splash

· High quality construction.

· Contains anti limescale materials approved to BS6920 for potable water aerated stream.

· Reduces detergent use when washing - thereby helping the environment.

· Enhanced velocity of stream added to aeration gives improved comfort of use.

· Use of original housing retains design and aesthetics of original tap.

Fitting Instructions

1. Slide the opening of the blue tool around the end of the tap. There are various size fittings so make sure the tool fits snugly.

2. Twist anticlockwise until the end of the tap comes away from the spout.

3. Remove the original insert from the housing.

4. From the components, select one to replace the old insert, as follows (you’ll find only one component will fit):

5. The grey ring is for housings that have an internal shoulder at the outlet of the housing.

6. The black ring is for housings that have no visible shoulder.

7. For small housings (JR size) just insert the aerator.

8. Install the converter ring into the tap housing and using original gasket replace on to spout hand tight. If using the grey or black converter ring, insert the aerator fully into the ring until the top of the aerator is flush with the top of the ring.

Tap Aerator Inserts Kit contains the following items

4 adaptor rings ( 2 x black & 2 x grey) to select for your present housing when fitting.

2 x 3.5 litres a minute aerator with Intelligent Flow Control

Will they fit my taps?

The tap insert requires the tap end to have two straight edges. It will fit the majority of taps with a screwed outlet housing. It is not suitable for large bath taps. The inserts should not affect the performance of your taps, merely regulate the flow to 3.5 litres per minute.